FUJITSU ErgoPro m664 - Manual (Page 41)

PC Specialist's Handbook ErgoPro m664-series
Edition 1 - Release 1 - March 1998 Page 3-13
Boot menu
Restore On AC/Power Loss
Specifies how the computer responds following a power failure. Stay Off keeps power off until power
button pressed. Last State restores previous power state before a power failure. Power On restores
power without restoring previous power state.
Stay Off
Last State (default)
Power On
On Modem Ring
Specifies how the computer responds to an incoming call on an installed modem when the power is off.
Stay Off (default)
Power On
On LAN
Specifies how the computer responds to a LAN wakeup event when the power is off.
Stay Off
Power On (default)
On PME
Specifies how the computer responds to a PCI power management enable event when the power is off.
Stay Off (default)
Power On
QuickBoot Mode
Enables the computer to boot without running certain POST tests.
Enabled (default)
Disabled
Scan User Flash Area
Enables the BIOS to scan the flash memory for user binary files that are executed at boot time.
Disabled (default)
Enabled
First Boot Device
Specifies the boot sequence from the available devices. To specify boot sequence:
1. Select the boot device with <
↑
> or <
↓
>.
2. Press <+> to move the device up the list or <-> to move the device down the list.
The operating system assigns a drive letter to each boot device in the order listed. Changing the order of
the devices changes the drive lettering.
Removable Devices (default)
Hard Drive
ATAPI CD-ROM Drive
Network Boot
Second Boot Device
Removable Devices
Hard Drive (default)
ATAPI CD-ROM Drive
Network Boot
Third Boot Device
Removable Devices
Hard Drive