Replacing ink cartridges – FARGO electronic STYLUS NX625 User Manual
Page 24
![background image](/manuals/103433/24/background.png)
24
Replacing Ink Cartridges
Replacing Ink Cartridges
Make sure you have a new ink cartridge before you begin.
Caution:
Do not open ink cartridge packages until you are ready to install the ink. Cartridges are
vacuum packed to maintain reliability.
Leave the expended cartridge installed until you have obtained a replacement, or the
ink remaining in the print head nozzles may dry out.
1. Turn on the product.
2. If an ink cartridge is low or expended, you see a
message on the LCD screen indicating which
color to replace. Press
OK
.
If you’re replacing a cartridge before you see a
message on the LCD screen, press
Home
,
press u, d, l, or r to select
Setup
, and press
OK
. Then press u or d to select
Maintenance
,
press
OK
, press u or d to select
Ink Cartridge Replacement
, and press
OK
again.
3. Open the scanner, then open the cartridge cover.
4. Squeeze the tab on the cartridge and lift it up.
Dispose of it carefully. Do not take the used
cartridge apart or try to refill it.
Warning:
If ink gets on your hands, wash them thoroughly with
soap and water. If ink gets into your eyes, flush them
immediately with water. Keep ink cartridges out of the
reach of children and don’t drink the ink.