FujiFilm 2650 - Manual (Page 7)

12 13
1
Indicator
◆
Replacing an xD-Picture Card
◆
When you push the xD-Picture Card into the slot
and then slowly remove your finger, the lock is
released and the xD-Picture Card is pushed out.
You can then pull the xD-Picture Card the rest of
the way out.
3 Push the xD-Picture Card firmly into the
xD-Picture Card slot as far as it will go.
4 Close the battery cover.
●
! If you open the battery cover while the camera is still
switched on, the camera is automatically switched
off to protect the xD-Picture Card.
● ! The xD-Picture Card will not slide fully into the slot if
it is inserted facing the wrong way. Be careful not to
apply undue force to the xD-Picture Card.
●
! When storing xD-Picture Card, always use the anti-
static case provided.
● ! Take care not to remove your finger too quickly
after the lock is released, as the card may
spring completely out of the slot.
0 3
0 4
1Slide the battery cover out to open it.
2Load the batteries correctly as shown.
●
! Do not apply excessive force to the battery cover.
LOADING THE BATTERIES AND xD-Picture Card
0 1 0 2
Do not open the battery cover while the camera
is still switched on. This could damage the xD-
Picture Card or corrupt the image files on the
xD-Picture Card .
◆
When you want to replace
the battery
◆
● ! Take care not to drop the battery when opening
and closing the battery cover.
Check that the camera is switched off, open the
battery cover and then remove the battery.
Indicator