FujiFilm 2650 - Manual (Page 34)

67
5
66
5
Settings
g ADJUSTING THE MONITOR BRIGHTNESS
You can set the monitor brightness in “ Q ”, “ w ”
and “ T ” mode.
1Press the “MENU/OK” button to display the
menu screen.
2Press “d” or “c” to select “ g ” OPTION and
then press “a ” or “b ” to select “LCD
BRIGHTNESS”.
3Press the “MENU/OK” button.
2
0 1 0 2
0 1 0 3 0 2 1
●
! To exit this procedure without changing the settings,
press the “BACK” button.
1 Use “d” or “c” to adjust the LCD monitor
brightness.
2 Press the “MENU/OK” button.
Pressing the “MENU/OK” button confirms the
DPOF settings.
Pressing the “BACK” button returns you to the
settings screen
. 5
7
Pressing the “MENU/OK” button confirms all the
settings.
◆
DPOF settings cannot be changed.
◆
If you select a frame for which DPOF settings have
already been specified, the “
¥
”
message appears.
Pressing the “MENU/OK” button erases all the
DPOF settings already specified. You must then
specify the DPOF settings again.
● ! Press the “BACK” button to leave the previous
settings unchanged.
●
! During playback, check that the “i ” icon is
displayed for the previous settings.
i DPOF SET FRAME
PLAYBACK MENU