FujiFilm 2650 - Manual (Page 33)

64 65
4
3 5 0 1 0 2
6
1 Use “d” or “c” to display the frame for which
you want to specify DPOF settings.
2 Press “a” or “b” to set “YES” for the frame to
be printed and then press the “MENU/OK”
button or “c”.
To specify more DPOF settings, repeat steps 1
and 2.
● ! DPOF settings cannot be specified for movies.
●
! “TOTAL” shows the total number of frames for which
prints have been ordered.
When you have finished the settings, always
select “FINISH” and press the “MENU/OK”
button.
If you press the “BACK” button, no DPOF settings
are specified.
● ! You can only specify one print per frame in the DPOF
settings. Note also that you can specify prints for up
to 999 frames on the same xD-Picture Card.
Continued on next page...
1Press “a” or “b” to select “DDATE”.
2Use “d ” or “c ” to select “DATE ON” or
“DATE OFF”.
The selected setting is then valid for all frames
with DPOF settings.
3
0 1 0 2
4
0 1 0 2
1Press “a” to select “OK”.
2Press the “MENU/OK” button.
i DPOF SET FRAME
PLAYBACK MENU