FujiFilm 2650 - Manual (Page 16)

30 31
2
During playback, you can skip backwards or forwards through
the images (the frame number increases or decreases) by
holding down “d” or “c” for approximately 1 second.
The displayed image does not change, but a progress bar
indicates the approximate playback location on the xD-Picture
Card.
1Set the Mode switch to “ w ”.
2You can “d” or “c” to move forward and
backward respectively through your images.
● ! When you set the Mode switch to “w ”, the last
image shot is displayed.
VIEWING YOUR IMAGES (PLAYBACK)
w MODE
0 1 0 2
Fast Forwarding Images
Playback frame
number
LCD monitor ON
Framing guideline
displayed
LCD monitor OFF
FRAMING GUIDELINE FUNCTION
Q MODE
You can select the framing guide function in “Q”
Still photography mode. The mode shown on the
LCD monitor switches each time you press the
“DISP” button. Press the “DISP” button to
display the framing guideline.
● ! The framing guideline is not recorded on the image.
●
! The lines in the scene frame roughly divide the
recorded pixels into three parts horizontally and
vertically. When the image is printed, the resulting
print may be shifted slightly from the scene frame.
Scene
Use this frame when you want to position your
main subject in the center of the frame or when
you want to align your shot with the horizon.
This feature provides a clear guide to the
subject size and the overall balance of the shot
so that you get exactly the shot you want.
Always use the AF/AE lock to compose your
picture.
Failing to use the AF/AE lock may result in the
image being out of focus.
◆
Important
◆
◆
Still images that can be viewed
◆
You can use this camera to view still images recorded on the FinePix 2650 or still images (excluding
some uncompressed images) recorded on a FUJIFILM digital camera that supports xD-Picture Cards.