Furuno DS-60 - Manual (Page 23)

2. NAVIGATION DATA DISPLAY
2-3
2.2 How to Set Navigation Data
2.2.1 Time
This section shows you how to select the source for time, set local time, and turn sum-
mer time indication (daylight savings time) on or off.
1. Press the MENU/ESC key to open the menu.
2. Select [Ship’s Time] then press the ENT key.
3. Select [Source] then press the ENT key.
4. Select [Internal] or [NAV EQUIP] then press the ENT key. Select [Internal] to use
local time, or [NAV EQUIP] to use UTC time. For [Internal], the [Local Time ADJ]
screen appears; go to step 5. For [NAV EQUIP], go to step 6.
5. Use S, T to set the time difference between local time and UTC time then press
the ENT key.