FUJITSU MAX3073FC - Manual (Page 11)

C141-E234 v
Important Alert Items
Important Alert Messages
The important alert messages in this manual are as follows:
A hazardous situation could result in minor or moderate personal injury if the
user does not perform the procedure correctly. Also, damage to the product
or other property, may occur if the user does not perform the procedure
correctly.
Task Alert message Page
Specification Data loss
The drive adopts Reed-Solomon code for ECC. The sector-data is
divided into 3 interleaving sectors, and ECC is performed in each
sector where the maximum number of errors (up to 9 byte) can be
corrected. [Total maximum byte: 9 byte
×
3 ( interleave) = 27 byte]
If the error of read sector keeps allowable error byte number,
correction is performed.
However, if error byte exceeds its allowable number, correction may
not be performed properly.
2-5
Installation Damage
Never remove any labels from the drive or deface them in any way. 4-3
Hot temperature
To prevent injury, never touch the drive while it is hot. The DE and
LSI become hot during operation and remain hot immediately after
turning off the power. 5-1