FujiFilm DVD-A1XV - Manual (Page 60)

60
4
MEMORY 1 1 2 3
0 0 OFF
E E
When Image Quality Adjustment 2 is selected and
adjusted:
WHITE LEVEL (–5 to +5) (Factory default: 0)
• This adjusts the white level.
BLACK LEVEL (–5 to +5) (Factory default: 0)
• This adjusts the black level.
CHROMA LEVEL (–6 to +6) (Factory default: 0)
• This adjusts the density of the color.
Remote control unit
5
When Image Quality Adjustment 3 is selected and
adjusted:
ENHANCER (0 to +11) (Factory default: 0)
• This emphasizes the contour of the image.
DNR (Digital Noise Reduction) (0 to +3)
(Factory default: 0)
• This reduces video noise.
CCS (ON/OFF) (Factory default: OFF))
• This performs removal of the color signal component
for images in which the color signal component is
mixed with the brightness signal. (Only effective
with progressive images.)
1 2 3
0 0 0
MEMORY 1
3
When Image Quality Adjustment 1 is selected and
adjusted:
• Press cursor button (ª), then select the image quality
adjustment item with cursor buttons ( 0 , 1 ), set the
adjustment value with cursor buttons (•, ª), and press
the ENTER button.
• All of the adjusted contents will be stored.
CONTRAST (–6 to +6) (Factory default: 0)
• This adjusts the light/dark difference of the image.
BRIGHTNESS (0 to +12) (Factory default: 0)
• This adjusts the brightness of the image.
SHARPNESS (MID) (–6 to +6) (Factory default: 0)
• This adjusts the sharpness of the image for the
intermediate frequencies.
SHARPNESS (HIGH) (–6 to +6) (Factory default: 0)
• This adjusts the sharpness of the image for the high
frequencies. (Only effective for progressive images.)
HUE (–6 to +6) (Factory default: 0)
• This adjusts the balance between green and red.
(This does not affect the component interlaced
output.)
MEMORY 1 1 2 3
0 0 0 0
M H
0
Remote control unit
Remote control unit