FujiFilm DVD-A1XV - Manual (Page 48)

48
B When “SPEAKER CONFIGURATION” is selected, use the • and
ª cursor buttons to select the speaker to be set then press the
ENTER button.
• The type of speaker used for the front speakers, center speaker,
subwoofer and surround speakers can be set. Use the • and ª
cursor buttons to select the speaker type, then press the
ENTER button.
LARGE
Select this when a large speaker is connected.
SMALL
Select this when a small speaker is connected.
NONE
Select this when no speaker is connected.
YES
Select this when a subwoofer is connected.
NO
Select this when no subwoofer is connected.
• When “CROSSOVER” is selected:
40 Hz, 60 Hz, 80 Hz (Factory default), 100 Hz, 120 Hz, set the
frequency of crossover.
✽ Press the RETURN button to return to the “SPEAKER SETUP”
menu.
B When “CHANNEL LEVEL” is selected, use the • and ª cursor
buttons to select the speaker to be adjusted, then use the 0 and
1 cursor buttons to set the level.
• TEST TONE
Use the 0 and 1 cursor buttons to select auto or manual.
Adjust so that the volume of the test tones output from the
different speakers sounds the same.
• The volume level output from the front speakers (left and right
channels), center speaker, surround speakers (left and right
channels) and subwoofer can be adjusted.
• The volume level can be adjusted between 0 and –10 dB in
steps of 1 dB.
• Settings SW +10 dB to “ON” increases by 10 dB the volume
level that is output from the subwoofer.
✽ Press the RETURN button to return to the “SPEAKER SETUP”
menu.
SPE AKE R SE TUP
CHANNEL LEVEL
DE C I S I ON : ENT E R BUT TON SE L EC T :
T E S T TONE
F RONT L CH
CENT ER
F RONT R CH
SURROUND R CH
SURROUND L CH
SUBWOOF ER
SW + 1 0 d B
OF F
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
OFF
Remote control unit
3
SPE AKE R SE TUP
SPE AK ER CONF I GURAT I ON
F RONT SP
CENT ER SP
SUBWOOF ER
SURROUND SP
CROSSOVE R
L ARGE
L ARGE
YES
L ARGE
80Hz
DE C I S I ON : ENT E R BUT TON SE L EC T :
Remote control unit Remote control unit