FujiFilm DVD-A1XV - Manual (Page 18)

18
DVD-A1XV
AV amplifier with DENON LINK input terminals
To power outlet
High quality digital sound with reduced digital signal transfer loss can be enjoyed by connecting a separately sold DENON LINK compatible
AV amplifier.
(8) DENON LINK connections
2 DENON LINK S.E. (2nd) settings:
• If you connect the DENON LINK, set to “2nd”.
At “DIGITAL INTERFACE SETUP” under “SETUP”, set “DENON
LINK” to “2nd (AUTO)”, “2nd (1394)” or “2nd (ANALOG)”. (See
pages 38 ~ 41.)
2 DENON LINK Second Edition:
• With the DENON LINK, Second Edition (2nd), the audio signals are
transferred from the DVD player to the AV amplifier in digital form,
with the same quality as the signals recorded on the disc.
• Digital transfer of the high quality multi-channel signals of DVD
audio is possible for all discs.
• When the DENON LINK connection, could be output 176.4kHz,
192kHz/24bit 2ch sources or 96kHz/24bit 6ch sources.
2 Compatibility with previous models:
• Digital audio signals output from a DENON LINK 2nd compatible
DVD player can only be played on a DENON LINK 2nd compatible
AV amplifier.
NOTES:
• When DENON LINK is set, the down-mixed audio signals are output only from the left and right terminals and front left and front
right terminals. If you want to use the analog terminals, set to “DENON LINK” to “OFF”.
• The DVD-A1XV’s speaker settings are invalidated when the DENON LINK connector is connected. (Make the speaker settings on
the AV amplifier to which the DVD-A1XV is connected.)
• When the DENON LINK 2nd connection, Super Audio CD’s signals are not output from the DENON LINK connector. Please use
the analog audio output terminals or IEEE1394 connectors.
DENON LINK