FujiFilm DVD-A1XV - Manual (Page 25)

25
(2) Rear Panel
@3
21-pin SCART terminal (AV1)
• Connect using a 21-pin SCART cable (available in stores).
@4
Audio output connectors (2ch AUDIO OUT)
• Connect using the included audio cord.
Multi-channel sound is down-mixed and output.
@5
Component video output connectors
(COMPONENT VIDEO OUT)
• Connect using video cords (available in stores).
@6
S-Video output connector (S-VIDEO OUT)
• Connect using an S-Video connection cord (available in
stores).
@7
Video output connector (VIDEO OUT)
• Connect using the included video cord.
@8
HDMI output connector (HDMI)
• Connect using HDMI (TYPE A) connection cord (available
in stores).
@9
DVI-D-Video output connector (DVI-D OUT)
• Connect using 24P DVI-D connection cord (available in
stores).
#0
Audio output connectors (5.1ch AUDIO OUT)
• Connect using an audio cord. Connect a commercially
available pin-plug cord.
#1
Digital connectors (IEEE 1394)
• This is for connection of a separately sold AV amplifier
equipped with a IEEE 1394 connector.
• Use it to achieve high quality digital sound with low data
loss.
#2
Control connector (RS-232C)
• This is a terminal for future system expansion.
#3
Control input connector (ROOM TO ROOM IN)
• This is the input connector for wired remote control.
Consult your DENON dealer if you wish to use this
connector.
#4
Control output connector (ROOM TO ROOM OUT)
• This is the output connector for wired remote control.
Consult your DENON dealer if you wish to use this
connector.
#5
Digital output connector (DENON LINK)
• This is for connection of a separately sold AV amplifier
equipped with a DENON LINK connector.
• Use it to achieve high quality digital sound with low data
loss.
#6
Digital audio output connector (OPTICAL)
• Connect using an optical fiber cable (available in stores).
• Digital data is output from this connector.
#7
Digital audio output connector (COAXIAL)
• Connect using an digital audio cord. Connect a
commercially available 75
Ω
/ohms pin-plug cord.
• Digital data is output from this connector.
#8
Power input (AC IN)
• Connect to AC power supply using the included power
supply cord.
@4
#0 #2 #6#7 #5 #3 #4 #8 #1
@5 @3 @9 @6 @7 @8