beautypg.com

Changing the setup menu, Video setting – FUNAI MWR10D6 User Manual

Page 70

background image

68

EN

Changing the Setup menu

4

3

2

Video setting

1

Proceed to steps 1 to 3 above.

2

Using [K / L], select “Still Mode”. Press [OK].

3

Using [K / L], select a setting. Press [OK].
Your setting will be activated.

Press

[STOP C] if you are playing a disc.

Still Mode (Default : Auto)
Select “Auto” usually.

Note

• Frame is 1 completed video image made

up of 2 fields (There are 30 frame per

second of NTSC video).

Progressive Scan (Default : OFF)

This unit is compatible with the Progressive Scan System. The feature provides you with the higher definition images

than the traditional output system does. To utilize this feature, you must set Progressive Scan mode to “ON”.

1

Press [SETUP].

2

Using [K / L], select “Playback”. Press [OK].
Your setting will be activated.

3

Using [K / L], select “Video”. Press [OK].

4

Using [K / L], select “Progressive Scan”. Press [OK].

5

Using [K / L], select “ON”.
Press [OK].
Confirmation window will
appear.

6

Using [{ / B], select “Yes”. Press [OK].

7

Using [K / L], select “Yes” within 15 seconds. Press [OK].

8

Press [SETUP] to exit.

4

Press [SETUP] to exit.

Note

• If your TV is compatible with Progressive

Scan (525p / 480p), you must use the

Component video cable (commercially

available) to connect this unit to the TV. (See

Method 2 on page 13.) If not, use the video

cable and set the Progressive Scan to “OFF”

or press and hold

[SETUP] for more than 3

seconds during DVD playback.

• When selecting “No” or not pressing any

keys on the unit or remote control within
15 seconds at step 5, Progressive Scan
remains to be “OFF” (interlace scan).

1

4

3

2

Video - Progressive Scan

Activating progressive scan:
Check your TV has progressive scan
and connect with component video cable.

NOTE: If there is no picture or picture is

distorted after selecting “Yes”,

Wait about 15 seconds for auto recovery.

Activate?

Yes

No

Auto: Optimum resolution setting (Field or Frame) is selected.
Field: Images in the still mode will be stabilized.
Frame: Images in the still mode will be highly defined.

5

8

6

7