FUNAI MWR10D6 - Manual (Page 65)

63 EN
Before
you
start
Others
Español
Connections
Getting
started
Recording
Playing
discs
Editing
Changing
the
Setup
menu
Changing the Setup menu
Note
• If you change the setting in the Setup menu, the information of contents
stays on even when the power is switched off.
• An item which is not currently available is grayed in the Setup menus.
The following table is the contents which you can set and the default settings.
Refer to the following table for useful operation.
Tour of the Setup menu
Setup Items (highlight is the default) Contents
1.Language setting
Pages 64-65
Disc Menu Language English
French
Spanish
Set the language for disc menu.
Audio Language Original
English
French
Set the language for audio.
Subtitle Language OFF
English
French
Set the language for subtitle.
2.Display setting
Pages 65-66
OSD Language English
Français
Español
Set the language for OSD
(On Screen Display).
Angle Icon ON
OFF Set the display or undisplay of
multi-angle icon in a case the
DVD in playback mode contains
multi-angle scene.
Screen Saver OFF
5 minutes
10 minutes
Set the time to work the screen
saver on the screen.
3.Audio setting
Pages 66-67
Digital Out PCM
48kHz
96kHz
Set whether the sound recorded
in 96kHz will be down sampled
in 48kHz.
Dolby Digital
PCM
Stream
Set the type of sound signal
which outputs from the digital
audio output jack.
Dynamic Range
Control
ON
OFF
Compressing the range of sound
volume.
4.Video setting
Page 68
Progressive Scan ON
OFF
Set to the progressive scan mode
(set to “ON”) or to the interlace
scan mode (set to “OFF”).
Still Mode Auto
Field
Frame
Set the type of still image in
pausing playback.
5.Parental setting
Pages 69-70
Parental Lock
(Change password)
All
level 8 to 1
Set the parental level of your
DVD discs.
Enter the current
four-digit password Set and change the password.
6.PBC setting
Page 70
PBC (Video CD only) ON
OFF
Set the Playback Control.
(Video CD only)