FUJITSU SPARC M3000 User Manual

Page 11

C120-E360-06EN

Preface

1 Message

Global Site

http://www.fujitsu.com/sparcenterprise/msg/

Japanese Site

http://primeserver.fujitsu.com/sparcenterprise/msg/

2 Firmware program

You can download the latest files of firmware at the following websites.
Global Site

http://www.fujitsu.com/sparcenterprise/firmware/

Japanese Site

http://primeserver.fujitsu.com/sparcenterprise/download/
firmware/

The following files or document are provided.

• Firmware program file (XSCF Control Package (XCP) file)
• XSCF extension MIB definition file

Note:

XSCF Control Package (XCP) : XCP is a package which has the control
programs of hardware that configures a computing system. The XSCF

firmware and the OpenBoot

PROM firmware are included in the XCP

file.

3 Fault Management MIB (SUN-FM-MIB) definition file

http://src.opensolaris.org/source/xref/onnv/onnv-gate/
usr/src/lib/fm/libfmd_snmp/mibs/

Solaris Operating System Related Manuals

http://docs.sun.com

Provided In firmware program CD (For maintenance service )

• Firmware program file (XSCF Control Package (XCP) file)
• XSCF extension MIB definition file

Information on Using the RCI function
The manual does not contain an explanation of the RCI build procedure. For
information on using the RCI function, refer to the SPARC Enterprise M3000/
M4000/M5000/M8000/M9000 Servers RCI Build Procedure available on the
website.