17 color to be read in unicolor reading, 18 setting the grayscale mode – FUJITSU fi-4340C User Manual
Page 82
● 7 - 18
7. At Screen 45, press
or
to change the top setting. The value changes in 1 mm units. Then press
to activate the setting. The scanner displays the next setup item.
17 Color to be Read in Unicolor Reading
1. Press “Next”
or “Previous”
and let the scanner display Screen 46.
Screen 46
2. At Screen 46, press
or
to select a light source. Press
if you want to activate the setting.
NOTICES
1.The specification from the host computer has priority.
2.The default is G (Green).
3. Press
to
return.
18 Setting the Grayscale Mode
1. Press "Next"
or "Previous"
to display Screen 47 on the LCD.
Screen 47
2. In Screen 47, press
or
to select "Normal", "Fast".
"Normal" refers to quality priority mode. When "Normal" is selected, scanning is performed at a
quality higher than that of the Fast mode.
"Fast" refers to the regular mode. When "Fast" is selected, scanning is performed at the machine
defaults for image quality and speed.
The lower display of Screen 47 is switched as follows:
1.”Normal/Fast" is displayed, and "Normal" flashes.
2."Normal/Fast" is displayed, and " Fast" flashes.
Switch between the above states as follows:
Press
: The lower display of Screen 47 is switched cyclically in order from 2 to 1.
Press
: The lower display of Screen 47 is switched cyclically in order from 1 to 2.
=
R
/
G
/
B
!
1
9
R
e
a
d
C
o
l
o
r
=
N
o
r
m
a
l
/
F
a
s
t
!
2
0
G
r
a
y
M
o
d
e