12 select interface, 13 display the tps board id number – FUJITSU fi-4340C User Manual
Page 78
● 7 - 14
12 Select Interface
1. Press “Next”
or “Previous”
and let the scanner display Screen 31.
Screen 31
NOTICE
The Screen 31 and 31-2 will appear oniy when the scanner has proper interface boards or option
boards in the third party slot.
2. At Screen 31 and 31-2, press
or
to select the interface type. Press
if you want to change
the setting.
NOTICE
1.Normally, this setting does not have to be changed.
2.When an appropriate board is installed in the third party slot of the scanner, the scanner
automatically turns off the SCSI or USB interface, activating the board in the third party slot. Screen
31 and 31-2 can be used to forcibly change the selected interface. The selected interface is then
forcibly changed.
3.The SCSI interface, USB interface and the board installed in the third party slot cannot be used at
the same time.
4.The default is Auto.
3. Press
to
return.
13 Display the TPS Board ID Number
1. Press “Next”
or “Previous”
and let the scanner display Screen 32.
Screen 32
The scanner displays the ID number if the applicable board is installed.
NOTICE
If the Fujitsu video Interface Option board is installed properly, the display shows “ID=7”.
2. Press
to
return.
=
A
u
t
t
o
/
S
/
!
1
4
I
n
n
d
d
t
e
r
r
f
a
a
a
c
e
=
t
/
S
S
T
P
/
!
1
4
I
n
n
d
d
t
e
r
r
f
a
a
a
c
e
I
n
t
e
r
f
a
c
e
I
D
=
0
!
1
5
T
P
S
B
o
a
r
d