FUJITSU fi-4340C - Manual (Page 13)

xi
Do not install the device in locations subject to oil smoke, steam,
humidity, and dust.
Do not use the scanner if you smell a strange odor.
Ensure that water or foreign matter does not enter the
equipment.
Do not touch the inside of the scanner unless necessary.
Do not install the scanner in locations subject to oil smoke, steam,
humidity, and dust. Doing so might cause a fire or electric shock.
Installation in areas with high levels of oil smoke, steam, humidity,
or dust may result in fire or electric shock.
If you detect heat coming from the device or detect other problems
such as smoke, strange smells or noises, immediately turn off the
scanner and then disconnect its power plug. Make sure that the
smoking has stopped, and then contact the store where you bought
the scanner or an authorized FUJITSU scanner service provider.
Do not insert or drop metal objects into the scanner. Do not scan
wet documents or documents with paper clips or staples. Do not
splash or allow the scanner to get wet.
If foreign objects (water, small metal objects, liquids, etc.) get inside
the scanner, immediately turn off the scanner and disconnect the
power plug from the power outlet, then contact the store where you
purchased the scanner or the Maintenance Service Center. Pay
particular attention to this warning in households where there are
small children.
Do not take apart or modify the scanner. The inside of the scanner
contains high-voltage components. Touching these components
might cause fire or electric shock.