FUJITSU fi-4340C - Manual (Page 52)

● 5 - 4
• Documents that are not square or rectangular
• Very thin documents
Do not use the following type documents for scanning with the ADF.
• Paper-clipped or stapled documents
• Documents on which the ink is still wet
• Documents smaller than A8 (portrait) size
• Documents wider than A3 or 11 in. x 17 in. size
• Documents other than paper such as fabric, metal foil, or transparencies
NOTICE
• When scanning semi-transparent documents, set the density to light to avoid a bleed through.
• Carbonless paper contains chemical substances that may harm the Pad or rollers (e.g. Pick roller).
Pay attention to the following:
Cleaning : If mispicks occur frequently, clean the Pad and Pick roller. For details on
cleaning method, refer to the “Cleaning and Maintenance” manual.
Replacing parts :The service life of the Pad and Pick roller may be shortened compared to the
case of scanning wood containing paper documents.
• When using the ADF, the leading edge of all document sheets must be evenly aligned. Make sure that
curling at the leadin edge is withtin the following toleranaces:
• To prevent rollers from becoming dirty, avoid scanning documents containing large areas written or
filled in pencil. If scanning of such documents is inevitable, clean the rollers more frequently.
Less than
3mm
More than 30mm Feed direction
Read surface Top of the paper
More than 30mm Feed direction
Read surface Top of the paper
Less than
5mm