FujiFilm FinePix A101 - Manual (Page 9)

16 17
1
1Use “d” or “c” to select the desired item and then
use “a” and “b” to correct the setting.
2When you have finished setting the date and time,
press the “MENU/OK” button to confirm the setting.
The “SET–UP” screen reappears. Press the
“MENU/OK” button to complete the settings.
●
! If you hold down “a” or “b”, the numbers change
continuously.
●
! When the time displayed passes “12:00:00”, the
AM/PM setting automatically switches.
● ! You cannot set the seconds. To set the time
precisely, press the “MENU/OK” button when the
time signal reaches zero.
0 1 0 2 3 4
If the date was cleared and you selected
“H”, the camera switches to photography or
playback mode without returning to the
“SET–UP” screen.
4
SETTING THE DATE AND TIME
1Press the “MENU/OK” button to display the
menu screen.
2Use “g” button or “f” to select “SET–UP”
from the “ d OPTION” menu.
3Press the “MENU/OK” button.
1The “SET–UP” screen appears. Use “a” or
“b” to select “DATE/TIME”.
2Press “c”.
●
! See P.52 for more information on the “dOPTION”
menu.
●
! If at least 10 minutes have passed since the AC
power adapter was connected or the battery inserted
and date and time set, then those settings will be
maintained for roughly 12 hours even when the
camera has no power supply (when the AC power
adapter is disconnected and the battery is removed).
If the date was cleared and you selected
“H”, proceed from step
( ➡P.17). 3
0 1 0 2 2 1 0 3 0 1
0 2