FujiFilm FinePix A101 - Manual (Page 25)

48 49
4
This function allows you to select whether or not
the date of shooting is included on the print.
1Press the “MENU/OK” button to display the
menu on the LCD monitor.
2Use “d” or “c” to select “ f DPOF”.
1Use “b” to select “ k DATE”.
2Use “d ” or “c ” to specify “DATE ON” or
“DATE OFF”. The selected setting is then valid
for all frames with DPOF settings until the
camera is switched off.
Then specify the DPOF settings ( ➡P.50).
●
! You must specify whether or not the date is included
before you specify the DPOF settings.
●
! The DPOF menu options do not appear when a
movie file is selected.
●
! You may not be able to specify DPOF settings for
some still shots taken on other cameras.
1 2 0 1 0 2 0 1 0 2
DPOF stands for Digital Print Order Format and refers to a format that is used for
recording printing specifications for images shot using a digital camera on media such as
SmartMedia. The recorded specifications include information on which frames are to be
printed.
This section gives a detailed description of how to order your prints with the FinePix A101.
✽ Note that some printers do not support date and time imprinting or specification of the
number of prints.
✽ Note that the warnings shown below may be displayed while you are specifying the
prints.
≠ ( ➡P.74)
If the “ ≠ ” message appears, you cannot erase the frame. Cancel the “DPOF”
settings and then try again
ª
( ➡P.74)
No more than 999 frames can be specified on the same SmartMedia.
f HOW TO SPECIFY PRINT OPTIONS
PLAYBACK MENU
f DPOF DATE SETTING
PLAYBACK MENU