FujiFilm FinePix A101 - Manual (Page 16)

30 31
3
ERASING SINGLE FRAME
4
Press “d” or “c” to display the image to be
erased.
Press the “MENU/OK” button to erase the
displayed image. When erasing is complete,
the next image appears and the “
¨ ”
message is displayed.
●
! Press the “BACK” button to cancel frame erasing.
●
! “ ≠ ” is displayed for frames with DPOF settings
and they cannot be erased ( ➡ P.74).
●
! If the “
–
” message appears, you
cannot erase the frame. Use the camera on which
the frame was protected to unprotect the frame.
3
To continue erasing images, repeat the
procedure from step
. 3
ADVANCED FEATURES PHOTOGRAPHY
3 Advanced Features
Photography
The “Advanced Features Photography” section introduces a range of camera functions that you can
access by setting the Mode switch to “
q ” or “ e ”.
■ Photography mode specifications
1 AUTO ( ➡P.32)
This is the easiest mode
for taking pictures and can
be used in a wide range of
conditions. y Flash ( ➡P.34)
l Self-timer ( ➡P.37)
Photography mode Accessible menu settings
Factory
default
AUTO
OFF
AUTO
0
AUTO
— —
2 MANUAL ( ➡P.32)
This mode allows you to
set the “EV” and “White
balance” settings.
e Movie ( ➡P.41)
In this mode, you can
shoot up to 20 seconds of
video at a time.
Shared menu
settings
d OPTION
✽ See P.52 for
more information
on each of the
settings.
Mode switch
q Still image
e Movie
y Flash ( ➡P.34)
a EV (Exposure Compensation)
(
➡P.39)
s White balance (Selecting the
Light Source) (
➡P.40)