FujiFilm FinePix A101 - Manual (Page 12)

22 23
2
LCD monitor OFF
LCD monitor ON
Framing Guideline displayed
FRAMING GUIDELINE FUNCTION
You can select the Framing Guide function in
“q” Photography mode. The mode shown on
the LCD monitor switches each time you press
the “DISP” button. Press the “DISP” button to
display the framing guideline.
● ! The framing guideline is not recorded on the image.
●
! The lines in the scene frame roughly divide the
recorded pixels into three equal parts horizontally and
vertically. When the image is printed, the resulting
print may be shifted slightly from the scene frame.
Scene
Use this frame when you want to position your
main subject in the center of the frame or when
you want to align your shot with the horizon.
This feature provides a clear guide to the
subject size and the overall balance of the shot
so that you get exactly the shot you want.
Number of Available Shots
■ Standard number of shots per SmartMedia
The number of shots may increase or decrease slightly depending on the type of subject. Note also that the larger
the SmartMedia capacity, the greater the discrepancy between the standard number of shots and the actual number
of shots.
The number of available shots appears on the
LCD monitor.
●
! See P.54 for information on changing the File Size
and Quality settings.
●
! The factory default settings at shipment are 1M (File
Size) and N (Quality: NORMAL).
MG-4S (4MB)
MG-8S (8MB)
MG-16S/SW (16MB)
MG-32S/SW (32MB)
6
12
25
50
MG-64S/SW (64MB) 101
File Size
Quality
Image Data Size
9 1280 ✕ 960 0 640 ✕ 480
Approx.620KB
FINE
12
25
49
99
198
Approx.320KB
NORMAL
30
61
122
247
497
Approx.130KB
NORMAL
MG-128SW (128MB) 204 398
23
46
89
180
361
Approx.170KB
BASIC
725 997
✽ The number of available shots are shown for formatted SmartMedia.
q TAKING PICTURES (AUTO MODE)
STILL IMAGE MODE