FARGO electronic PERSONA C10 - Manual (Page 70)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0)
70
Using the Magnetic Encoding Options
Use this option only if the Printer has an optional Magnetic Stripe Encoding Module installed.
(Note: This section describes these options and the Printer's Magnetic Encoding process.)
Step Procedure
1 Select the Magnetic Encoding Options to change the encoding mode,
coercivity setting, or to modify the ISO Standards for Tracks 1, 2 and 3. (Note:
By default, the Printer Driver is set to encode according to ISO Standards onto
high-coercivity Magnetic Stripes.)
Continued on the next page