FARGO electronic PERSONA C10 - Manual (Page 46)

RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0)
46
Resolving problems with streaks in Prints
Symptoms: Scratches or lines travel the entire length of the printed card.
Step Procedure
1 Symptom: There may be dust on the Printhead.
2 Symptom: There may be a scratch or a burned out element in the Printhead.
Contact the authorized reseller for technical assistance.
Resolving problems with Print blotches or small voids
Symptoms: There are small spots on the print with no ink or different colors of ink.
Step Procedure
1 Most likely due to dust inside the Printer.
2 Symptom: May also be caused by dust or embedded contaminants on the card.
Be sure the cards you are using are clean and stored in a dust free environment.
Some card stocks can have embedded contaminants in their polished surface
and should not be used. Only use card stock recommended for use with the
Card Printer.
3 Symptom: May also be caused by a filthy Cleaning Roller.