FUJITSU V810 - Manual (Page 64)

System expansions
56 A26361-K680-Z122-1-7619, Edition 1
1
2
► Pull the ventilation duct and the fan a few millimetres in the direction of the arrow (1) to pull the
hooks at the back of the casing out of the casing.
► Remove the ventilation duct and the fan from the casing in the direction of the arrow (2).
i
When lifting out the ventilation duct, the fan cable detaches itself from the mainboard.
When removing the ventilation duct, be careful not to damage the processor cooler(s) on
the mainboard.
Installing ventilation duct
► Pull the fan cable off the fan before the ventilation duct is installed in the device installing the
ventilation duct in the device.
► Connect the fan cable to the corresponding connector on the mainboard (also see the
technical manual for the mainboard).
i
When laying the fan cable, make sure that it is not kinked or pinched.
When fitting the ventilation duct, be careful not to damage the processor cooler(s) on the
mainboard.