FUJITSU V810 - Manual (Page 18)

Preparing for use
10 A26361-K680-Z122-1-7619, Edition 1
Switching on monitor and workstation
► Switch the monitor on (see the operating manual for the monitor).
► Switch on the workstation. To do this, follow the instructions below.
2
3
1
0
I
1 = Main power switch
2 = ON/OFF switch
3 = LCD display 0 = Workstation is switched off
I = Workstation is ready-to-operate
► Press the main switch (1) on the back of the workstation.
► Press the ON/OFF switch (2) on the front of the workstation.
The LCD lights up: The workstation is on. Up to seven symbols are displayed, depending on the
operating state (see chapter "Indicators on the workstation").