FUJITSU C150-E187-01EN - Manual (Page 83)

77
Use of FUJITSU Scanner Control Center: Disabled
Product: M3099G, M3099GX
Type: Desktop
Image sensor: Reduced optical system
Operating method: Automatic Document Feed (ADF), simultaneous double-sided
reading
Light source: Fluorescent tube (Green)
Basic resolution: Horizontal scanning: 200 dpi
Vertical scanning:
400, 300, 240, 200 dpi
Output resolution: Standard: 400, 300, 240, 200, dpi
With image processing option: 50 dpi to 400 dpi (at steps of 1 dpi)
Grayscale levels (internal): 8 bit 256 levels
Grayscale output: Disabled
Halftone Patterns: Dither matrix (can be downloaded), Error diffusion
ADF scanning speed
1
:
Single sided: 55 pages per minute (200 dpi, A4, 55 kg)
Double sided: 50 pages per minute (200 dpi, A4, 55 kg)
(= 100 screens per minute)
Single sided: 60 pages per minute (200 dpi, A4, 55 kg)
Double sided: 50 pages per minute (200 dpi, A4, 55 kg)
(= 100 screens per minute)
ADF stacker capacity:
Maximum 500 sheets, ream weight: 55 kg, A4
Maximum 1,000 sheets, ream weight: 55 kg, A4
Document size: Maximum 297 mm × 432 mm
Supported regular paper 2 : A3, A4/A4 Landscape, A5/A5 Landscape, A6/A6 Landscape, B4,
B5/B5 Landscape, B6/B6 Landscape, Double Letter, Letter/Letter
Landscape, Legal, US Executive/US Executive Landscape
Cutout specification: Specified (one location)
Background compensation: Enabled
Contrast setting: 256 levels
Gamma pattern: 3 internal types (can be downloaded)
Use of FUJITSU Scanner Control Center: Disabled
1. This speed is only specified for the scanner itself. The actual reading speed may vary depending on the
system configuration.
2 Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device.
For other paper sizes, the customer settings can be used.