FUJITSU C150-E187-01EN - Manual (Page 49)

43
4.9 Setting the Configuration Options
These options are used to manage the setting files, and switch the basic scan dialog display.
Press the [Config] button of the main dialog to open the [Configuration] dialog box shown below.
Figure Option dialog box (simplified DTC)
♦
Setting Files
The setting information of the scan conditions can be saved in a “Setting file.”
Scan condition settings that have been set in advance in this dialog can be selected from the
list of setting files. This enables selection of all settings at the same time without having to
enter the scan conditions one at a time. Press the button to open the list of setting files.
Subsequent scanning operations can be performed effectively by registering several types of
scan conditions that are frequently used.