FUJITSU C150-E187-01EN - Manual (Page 66)

60
Selecting "Yes" displays a dialog box below.
(If "No" is selected, the function to start any application when the start button in this application
is pressed is disabled.)
Pressing the [OK] button after selecting one of function keys from F1 to F3 enables assigning a
function key to the start button. If the [Cancel] button is pressed, the function key is not
assigned to the start button.
(If the [Cancel] button is pressed, the function to start any application when the start button in
this application is pressed is disabled.)
♦
[Select Scanner]
When multiple scanners are connected, select a scanner to be monitored.
With this application, only one scanner can be monitored at a time. If multiple scanners are
connected, scanner switching is required to monitor the individual scanners.
Select a scanner to be monitored in the list of scanners to be connected. (The list is given
below.)