How to use the fujitsu scanner control center – FUJITSU C150-E187-01EN User Manual

Page 62

Text mode
Original mode

6. How to Use the FUJITSU Scanner Control Center

6.1 Outline

This software that is resident in the system continuously monitors the scanner connected and
starts the target application in response to an instruction from the operation panel in the scanner.
(Pressing the start button on the scanner starts the application that has been set in advance.)

For applicable models, see "Relevant Image Scanner Specification" in the Appendix.

6.2 How to Start the FUJITSU Scanner Control Center

Select as follows: [Start] - [Program] - [Scanner Utility for Microsoft Windows], then
[FUJITSU Scanner Control Center]

If this application is started, it is stationed in the system, then an icon is displayed on the task
tray.

An icon indication changes to show how the scanner is connected as follows:

1. The scanner can be used:

2. The scanner power is turned off and not connected: