Hitachi L32BD304 - Manual (Page 29)

29
ENGLISH
Icon Option Description
System
BD-Live Internet
Access
Sets the Internet access level.
BD-Live Storage Selects a USB drive to store BD-Live content.
Erase Blu-ray
Storage
Clears the non-volatile storage (application data area) on a Blu-ray Disc. The application data area is the
space on a Blu-ray Disc that stores information such as the subtitle language selection.
When you select this option, a confirmation box will appear. If you select “Ok”, unit erases the Blu-ray Disc
application data area. (Press A or ENTER to select Erase Blu-ray Storage, Update Via Network and Restore
factory defaults options.)
Update Via Network Updates the BD player’s software via the Internet. Check if the unit is connected to the Internet properly, then
select “Update Via Network” from the Setup Menu. When there is new software available on the software
update server, the “Automatic Upgrades Over the Internet” screen will appear.
Select “Ok”, then press ENTER. Downloading will start automatically and a progress bar will appear on
screen. Once the update is complete, the unit will automatically turn off and on.
Restore factory
defaults
Restore factory setting—Resets all settings to factory default.
Deactivate Pandora—Resets Pandora settings.
•
•
Network
Wired Link Status—Indicates whether or not the BD player is currently able to access an Internet site. Useful
when confirming the unit is properly connected to a network; “Link Up” is displayed if properly connected
and “Link down” if not.
MAC Address—Shows unit’s MAC address.
IP Mode—Selects the IP configuration mode. Select Dynamic (uses DHCP to automatically obtain an
IP address), Manual (let you manually configure network settings, such as IP Address, Subnet Mask,
Gateway, Primary DNS and Secondary DNS settings), or Off (disables the network interface).
* The network cannot be connected to the Internet by way of a proxy server.
•
•
•
Network Test Press ENTER to select this option. It tests unit’s Internet connection by “pinging” an IP address. A “ping” sends
a message to an Internet address and waits for a reply to verify that a connection is working.
Display
BD/DVD Output Selects the picture size, so you can match the size of the TV screen. You can select “16:9 Wide” or “16:9
Pillarbox”.
Note: For a wide-screen TV, select one of the 16:9 aspect ratios. If you select an aspect ratio that does not match
your TV’s screen size, the resulting picture display may be unpredictable.
This setting applies to Blu-ray mode only. It changes the aspect ratio for a disc recorded at in a 4:3 format,
but does not change the aspect ratio for a disc recorded in a 16:9 format.
•
Audio
Digital Output Selects the digital audio output. The option you select depends on the capabilities of the sound system you
have connected to unit.
PCM Stereo—Sends mixed digital audio over SPDIF in two-channel PCM format.
Bitstream—Sends the original bitstream from disc over SPDIF using legacy audio formats. Blu-ray Disc
audio is limited to the soundtrack for main movie and does not send PIP audio or audio effects.
Bitstream Mixed—Blu-ray Disc audio streams are mixed and encoded into a single bitstream. Use
this option if you are using an SPDIF 5.1CH receiver and you want to enjoy mixed Blu-ray Disc audio in
surround sound.
Note: When “Bitstream” is selected, unit cannot output secondary audio.
•
•
•
Dynamic Range
Control
Sets Dynamic Range Control to “On” or “Off”.
Dynamic Range Control is only active when a Dolby Digital signal is received. When you turn on this option
and movie soundtracks are played at low volume or from smaller speakers, unit applies compression to make
low-level audio more intelligible and prevents loud audio from getting too loud.
On—Select this option if you play movies at low volume or if you have small speakers. Unit uses
compression to make low-audio content easier to hear and prevent high-audio content from getting too
loud.
Off—Select this option if you do not want to use the DRC feature. The DRC gain value is ignored, and the
audio program is reproduced with full dynamic range.
•
•
Language
OSD Selects the Setup Menu language. You can select “English”, “Français”, or “Español”.
Menu Selects the menu language for the disc.
Audio Selects the audio language for the disc.
Subtitle Selects the subtitle language for the disc.
Parental
Parental Country
See page 30.
Parental Control
Parental Level
Parental Password
Setup Menu options
00_54L0621A.indb 29 00_54L0621A.indb 29 10.4.27 3:15:30 PM 10.4.27 3:15:30 PM