Heat & Glo Fireplace SL-950TV-D - Manual (Page 28)

Heat & Glo • SL-550 / 750 / 950TV-D • 2053-985 Rev. J • 4/07 28
LOG #1 (SRV2045-700): Place log #1 on the grate using the notches in the bottom of the log. Slide log
#1 up to the front tabs for NG. Slide it back until top of log touches the back of the fi replace for LP.
LOG #2 (SRV530-719):
Place log #2 on the right two grate bars using the notches in the bottom of the log.
Slide the log backward until the back edge is in contact with the tab and parallel to log #1.
1
2
3
4
6
5
NOTCHES
1
2
NOTCHES
METAL TABS
Log Set Assembly: LOGS-SL750-D If the gas logs have been factory installed they should not
need to be positioned. If the logs have been packaged
separately, refer to the following instructions.
Carefully remove the logs from the packaging.
CAUTION: Logs are fragile!
Models: SL-750TV-D, SL-950TV-D