HP 7750 User Manual

Page 29

5-29

Cisco ICS 7750 Installation and Configuration Guide

78-14165-03

Chapter 5 Operating the Cisco ICS 7750

Backing Up System Data

Copy and paste the output from the show startup-config command into a text
file where you stored your backup files:

–

Choose Start > Run.

–

Enter the following command to open Notepad:

notepad.exe

–

Select and copy the startup-config output from the Telnet console, and
paste it into the Notepad window.

Note

Do not include the

– More –

lines if they are displayed in the

output. Select the contents from the Telnet console, and copy
them to the clipboard. Go to the Notepad window, and paste the
clipboard contents.

– More–

is displayed at the bottom of the Telnet console, press the

space bar to display the next screen. Copy from the Telnet console again,
and paste to the Notepad window. Repeat until the entire startup
configuration has been displayed, copied, and pasted.

–

From Notepad, choose File > Save.

–

Save the startup-config file under the Shared Pathname you entered in
Step 3d in the

“Using Backup Now” section on page 5-27

(for example,

\\hostname\sharename\path). Name the config file in this format:
_, where backupname comes from the
Backup Name in Step 3a in the

“Using Backup Now” section on