HP 7750 User Manual

Page 24

Chapter 5 Operating the Cisco ICS 7750

Backing Up System Data

5-24

Cisco ICS 7750 Installation and Configuration Guide

78-14165-03

Note

The backup procedures in this section do not cover other software that you can
install on the system, such as Cisco CallManager. For instructions on how to back
up and restore Cisco CallManager data, refer to Backing Up and Restoring
Cisco CallManager 3.3.

Note

Before starting a backup, make sure that at least 75 MB of storage space is
available on the target device.

Note

Record the SNMP community strings, IP addresses of system cards, and the
Windows 2000 administrator password (user ID administrator) in a secure
location. To restore system data, the system must be configured with the same
settings as were in use at the time the backup was made.

Note

You cannot currently back up system COM port settings.

Tip

Write the IP addresses of system cards on adhesive labels, and affix them to the
card faceplates. Record your Windows 2000 administrator password and SNMP
community strings in a secure location. Having this information available can
facilitate troubleshooting and make it easier to restore system data.