HP 7750 - Manual (Page 18)

Chapter 5 Operating the Cisco ICS 7750
Accessing the System
5-18
Cisco ICS 7750 Installation and Configuration Guide
78-14165-03
• SNMP settings
– Changing read-only and read/write SNMP community strings of the
SNMP server
– Changing the server destination of SNMP traps
– Managing the SNMP server
• Logging
– Changing the syslog logging host
Note SNMP community strings and system passwords are case sensitive.
The following tasks should never be configured on the Cisco ICS 7750 by using
the Cisco IOS CLI under any circumstances:
• Shutting down an Ethernet interface
• Assigning a system card to a VLAN other than VLAN 1 (the management
VLAN)
Note MRP300, MRP3-8FXS, MRP3-16FXS, and MRP3-8FXOM1 cards
may be assigned to multiple VLANs. They can be assigned a VLAN
other than VLAN 1 as long as they also are members of VLAN 1.
• Disabling Cisco Discovery Protocol (CDP) on an Ethernet or VLAN interface
• Configuring Domain Name System (DNS) on SPEs
• Disabling Network Time Protocol (NTP)
• Invoking the Cisco Network Registrar (CNR) dhcp.exe from c:\program
files\network registrar\bin