High End Systems High End LCD Controller for Studio Color - Manual (Page 47)

Studio Color LCD Controller Connecting Fixtures 2-13
2
However, the Studio Color fixture has several built-in
random (or unsynchronized) effects which work
randomly even if multiple fixtures are assigned the
same fixture number. For more information, see the
section titled “Programming Hints” on page 3-2.
4. Press the button to save the fixture number and
continue with the section titled “Cables and Terminators” on
page 2-14.
Selecting Fixture Numbering
The Studio Color LCD controller requires each fixture to be
assigned a fixture number rather than a DMX address, so if
the display as shown in Figure 2-6 indicates the fixture is
currently set for DMX address, you must change it using the
procedure below:
1. Keep pressing the button on the fixture until the
display shows ADDR as shown in Figure 2-5 on page 2-12.
2. Use the and arrow buttons to select SET as
shown below:
Figure 2-7. The Set menu allows you to change various
fixture parameters, including how fixtures are addressed.
3. Press the button, then use the and arrow
buttons to select CHNL as shown below:
Figure 2-8. The CHNL menu option selects either DMX
addressing or fixture number “addressing”.