High End Systems High End LCD Controller for Studio Color - Manual (Page 124)

5-10 Selecting MSC or LSC Studio Color LCD Controller
If you are continuing from the previous section, begin with Step 3.
1. Enter the menu system by pressing the key.
2. Select
;
from the Main menu, as shown below:
3. Press the Cursor arrow key. The LCD display
appears as shown below:
4. The LCD display above indicates the controller is currently
set for the default ID of 0.
5. Use the Construct and arrow keys to change the
value of the
7
. Values range from 1 to 223 for LSC
and 0 to 126 for MSC.
• In LSC, ID 0 (zero) means that the device responds to
any ID.
• MSC uses device ID 127 to tell a device to respond to
any signal.
6. Press the Cursor and arrow keys to select
another menu item, or press the Cursor arrow key to
return to the Main menu.
7. If you selected MIDI Show Control, you must power cycle the
controller. Turn the power OFF then back ON.
)
;:-(
- D(
(
E7G7 G) )
3 ,
7A 5