High End Systems High End LCD Controller for Studio Color - Manual (Page 139)

Studio Color LCD Controller User Key Macros 6-9
6
User Key Macros
The controller has eight front panel User keys that can be
used to store custom macros (a recorded series of up to 256
keystrokes); five of the first six keys have pre-programmed
definitions that you can use or record over. (You can access
the default definitions even after you record over the keys.)
User keys 1 through 8 are factory
programmed as follows:
User 1 – Random (time) advance
User 2 – Color modulate
User 3 – Audio advance 1
User 4 – Undefined (not programmed)
User 5 – Audio advance 2
User 6 – Dim modulate
User 7 – Undefined (not programmed)
User 8 – Undefined (not programmed)
Recording or Editing User Key Macros
A macro is a recording of up to 256 keystrokes that you can
assign to any of the eight User keys. Simply pressing the
assigned User key immediately plays back the macro.
Note Press the same User key again to toggle off and on the
key function.
1. Press and hold the User key you wish to record until
appears on the LCD display, then release the key. The
LCD display then appears as shown below:
2. Select from the menu.
1 2
3 4
5 6
7 8
USER
Eight User Keys
!0) (
- D
) ))