High End Systems High End LCD Controller for Studio Color - Manual (Page 169)

Studio Color LCD Controller RAM Card: Memory 7-7
7
3. Use the Cursor and arrow keys to select
?
from the Main menu, as shown below:
4. Press the Cursor arrow key to view the menu items,
then use the Cursor and arrow keys to select
,
, as shown below:
5. Press the key to load the contents of the RAM card to
the controller, or press the key to exit without loading
from the RAM card.
6. After pressing the key, the LCD display appears as
shown below:
7. Press the key again to begin the load operation, or
press the key to cancel the operation. The controller restarts after memory has been restored.8.After memory has been restored, the controller is
automatically placed in mirror mode, causing subsequent
programming to be recorded to both the RAM card and to the
controller’s memory. •If you wish to use mirror mode, leave the RAM card in
the slot.•If you do not wish to use mirror mode, write-protect the
RAM card as shown in the section titled “RAM Card:
Write-Protection” on page 7-12, then remove the RAM
card and put it in a safe place. ) ? H-
- D(), , 3, - ;
), , 3, N ;A)<;0:A ) Pages: 1 … 167 168 169 170 171 … 272 wrong Brand wrong Model non readable See also other documents in the category High End Systems Acoustics: AF1000 (48 pages) Sitemap key to cancel the operation. The controller
restarts after memory has been restored.
8. After memory has been restored, the controller is
automatically placed in mirror mode, causing subsequent
programming to be recorded to both the RAM card and to the
controller’s memory.
• If you wish to use mirror mode, leave the RAM card in
the slot.
• If you do not wish to use mirror mode, write-protect the
RAM card as shown in the section titled “RAM Card:
Write-Protection” on page 7-12, then remove the RAM
card and put it in a safe place.
) ? H-
- D()
, , 3,
- ;
)
, , 3,
N ;A)<;0:A )