High End Systems High End LCD Controller for Studio Color - Manual (Page 189)

Studio Color LCD Controller Macintosh 7-27
7
1. Toggle the key on the controller’s front panel until
the Standby LED turns ON.
2. Press and hold the key on the controller’s front
panel until the LCD display appears as shown below:
3. Your computer screen should display the following message:
Save from controller to PC.
Set PC to receive, then press RECORD to begin.
Press SELECT to quit anytime.
4. On your computer, press Command+F+N to start the file
capture. Enter a file name in the Capture File to Save text
field and click Save.
5. Press the key on the controller’s front panel to start
the transfer. The controller’s LCD display appears as shown
below while the transfer is taking place:
Note If you use White Knight, at the bottom of your screen
you will see a long series of characters that
increments as data is being sent. This is normal.
6. The controller’s LCD display returns to normal when the
transfer is complete. Press the
key on the controller’s front panel to stop the download.7.Press Command+F+C on your computer to end the file
capture.D)
;$2$
-
;77()<
/D)
;$2$
*#'-#'' Pages: 1 … 187 188 189 190 191 … 272 wrong Brand wrong Model non readable See also other documents in the category High End Systems Acoustics: AF1000 (48 pages) Sitemap key on the
controller’s front panel to stop the download.
7. Press Command+F+C on your computer to end the file
capture.
D)
;$2$
-
;77()<
/
D)
;$2$
*#'-#''