Digital performer, Pro tools, Cubase and nuendo – MOTU 828x 28x30 Audio Interface with ThunderTechnology User Manual
Page 55: Live
C O N F I G U R I N G H O S T A U D I O S O F T W A R E
55
Digital Performer
In MOTU Digital Performer, choose
Configure
Audio System > Configure Hardware Driver
from
the Setup menu, as shown in Figure 7-2. Choose
MOTU Audio ASIO
from the list of ASIO drivers.
Figure 7-2: Enabling the 828x in Digital Performer
Pro Tools
In Avid Pro Tools, go to the Setup menu and
choose
Playback Engine
as shown in Figure 7-3.
Choose the
MOTU Audio ASIO
from the Current
Engine menu. For information about the
H/W
Buffer Size
setting, see “Adjusting the audio I/O
☛
Pro Tools 9 or later is required for operation
with the 828x.
Figure 7-3: Enabling the MOTU Audio ASIO driver in Pro Tools
Cubase and Nuendo
In Cubase or Nuendo, go to the
Device Setup
window. Click the
VST Audio System
item in the
Devices list and choose
MOTU Audio ASIO
from
the
VST Audio System
menu as shown below in
Figure 7-4. Activate the inputs and outputs within
Cubase or Nuendo as usual.
Figure 7-4: Enabling the MOTU Audio ASIO driver in Cubase
Live
In Ableton Live, access the preferences window and
click the
Audio
tab. Choose
ASIO
from the
Driver
Type
menu. Choose the
MOTU Audio ASIO
from
the
Input Audio Device
and
Output Audio Device
menus as shown below in Figure 7-5. To enable or
disable input or output channels, click the
Input
Config
or
Output Config
buttons.
Figure 7-5: Enabling the MOTU Audio ASIO driver in Live