MOVE'N SEE Pix4Team 2 Auto-Follow Camera - Manual (Page 6)

FILM WITH A CAMERA FILM WITH A SMARTPHONE / TABLET
lf you choose to film with one of the compatible cameras
mounted on the robot, here is the procedure:
The camera mounted on the robot
and the wide-angle camera must
face the sport field.
The PIX4TEAM Camera application (see page 10) allows you
to benefit from the automatic zoom, remote recording and
video feedback in the PIX4TEAM Remote application: very
useful when the robot is at the top of the mast.
If you choose to film with your
smartphone / tablet mounted
on the robot, here is the
procedure :
You can film with your usual
video app (camera app on your
phone or any video app of your
choice!).
You will then start recording directly from this application
and can adjust the desired zoom level from there.
Vissez la caméra sur la platine
grâce à la vis 1/4" (vis avec
l'anse).
Place the quick-release plate on the
robot using the lock on the back.
Remove the cross-head
screw from the plate (the
screw is only used for the
cameras).
Screw the smartphone/tablet
holder on the quick-release
plate using the 1/4" screw
(screw with the handle).
Make sure to align the
smartphone/tablet on the
plate. The camera mounted
on the robot and the
wide-angle camera must
face the sport field.
Connect the MULTI cable*
between the camera and the
robot to be able to control the
zoom and recording of the
camera.
*or LANC OR AV/R cable
depending on the camera model
If you are using a smartphone / tablet on the PIX4TEAM
robot to film, you will need a second smartphone / tablet to
configure the robot via the PIX4TEAM Remote app.
Connecting the HDMI cable between the camera and the
robot will allow you to record the video from the SONY/
CANON camera directly on the robot (you will need a
microSD card in the robot), to live stream, and also to have
the video playback from the SONY/CANON camera on
the PIX4TEAM Remote application (NB: the HDMI cable is
not supplied in the PIX4TEAM kit, it is supplied with most
cameras).
ASTUCE
ASTUCE
It is possible to use a camera that is not compatible. In this
case, do not connect any cables, you will have to start the
recording manually and there will be no zoom.
ASTUCE
ASTUCE
HDMI MULTI
6