MOVE'N SEE Pix4Team 2 Auto-Follow Camera - Manual (Page 24)

Automatic zoom quality
The automatic zoom quality
is alterated
1. Check that your camera is in the list of compatible cameras (most SONY
and CANON cameras are compatible).
2. Check that you have selected the correct camera model in the PIX-
4TEAM Remote application settings.
3. Check that you are zooming automatically and not manually.
4. Check that the Multi or Lanc cable is properly connected between your
camera and the robot.
5. Check that the selected zoom level corresponds to your requirements,
as you can change the automatic zoom level between Wide, Normal and
Tight.
6. Check that the 4 corners (orange circles) on the wide-angle camera
return are correctly positioned. The perimeter of the terrain taken into
account by the robot may be distorted, leading to an alteration of the au-
tomatic zoom.
7. You have not placed your robot far enough from the edge of the pitch
(a minimum of 5m/10ft) and/or high enough ( a minimum of 4.80m/16ft) .
Quality of recordings via the app
The rec. of the top camera
is impossible or inexistant
1. Check that your camera is in the list of compatible cameras (most SONY
and CANON cameras are compatible).
2. Check that the Multi or Lanc cable is correctly connected between your
camera and the robot.
3. Check that your Micro SD card is compatible
4. On some camera models, it may take several seconds to start/stop re-
cording, so there's no need to press repeatedly.
5. Check that the camera is switched on.
The recording is interrupted
1. Check that you have enough space left on your microSD card (tip: after each
recording, upload your files on your cloud or local storage)
2. Check that the MULTI or LANC cable is plugged all the way on both the
camera and the robot
3. Check the battery level on your camera
24