MOVE'N SEE Pix4Team 2 Auto-Follow Camera - Manual (Page 11)

Important: place the 4 orange circles as precisely as possible and indicate the size of the field precisely (within 10ft), otherwise
the quality of the follow-up of the actions won't de as good.
After validation of this step, the application returns to vertical view. From then on the robot will be fully configured and operational,
and automatic tracking will be activated by default.
The video feedback from the wide angle or from the camera may take a few seconds to appear on the PIX4TEAM app.
WARNING
WARNING
After the validation step of the 4 corners, do not move or turn
the robot any more, do not modify the feet of the tripod, the
mast or the guy wires.
The robot must remain perfectly stable (except for slight
effects of the wind), otherwise it will mistake the position of
the ground and the tracking will be poor.
If the material has moved, you must replace the 4 circles in the
application to resume optimal tracking.
1 2
Place the 4 orange circles at the 4 corners of the field.
To help you place them as precisely as possible and adjust your robot's placement, the app switches to a horizontal view.
If you want to restart the complete placement of the 4 orange circles, a reset button (1) puts the circles back in their default
position.
A help button (2) guides you through this essential step. 2
1
3
We recommend not to use the PIX4TEAM Remote application with power saving mode
activated on your iPhone/iPad as this does not guarantee optimal functioning of the
application.
If you have activated the power saving mode on your iPhone/iPad, you will not have the video
feedback on the PIX4TEAM Remote application. You will have to press the Play button to
display the video feedback.
If the Play button does not appear or work, we recommend disabling the power saving mode
in your iPhone/iPad settings.
3
11