MOVE'N SEE Pix4Team 2 Auto-Follow Camera - Manual (Page 18)

C. Updating PIX4TEAM
- Press the "Update" button, and the update will be performed
automatically if an update is available.
- Once the update is complete, your PIX4TEAM will restart itself
to finalize the installation.
- Connect your robot to the internet.
- Connect your robot with the AC adapter.
- Press the gear icon at the top right corner of the PIX4TEAM
Remote app.
- Go to "Robot firmware update".
D. Update the PIX4TEAM Remote
The update of the application will be done like all other applications via the app store or the playstore.
If the update fails (steady red LED), turn the robot off then back on.
E. LEDs description
Your robot's internal software may sometimes need updating for additional functions or technical improvements. You will be
informed by our customer support or by a notification in the PIX4TEAM Remote application.
Robot is ON Slow flashing green LED
Recording on mounted device Steady green LED
Charging Orange LED
Bluetooth pairing Slow flashing blue LED
Robot is turning off
Slow flashing green and red
LEDs
Downloading the update
Slow and alternative flashing
green and red LEDs
Robot Initialization Fast flashing green LED
Installing the update
Quick and alternative flash -
ing green and red LEDs
Pairing not possible (robot not ready) Quick flashing blue LED
Steady red LED Update failure
Robot preparing after the update (please wait)
Steady blue LED and steady
red LED
18