Part 1. installation guide, A. provided equipment, B. turning the robot on and off – MOVE'N SEE Pix4Team 2 Auto-Follow Camera User Manual
Page 4: Power supply
A. Provided equipment
Your PIX4TEAM kit is delivered with:
1
The PIX4TEAM robot.
2
A quick-release plate with a 1/4" screw to install any camera,
smartphone or tablet.
3
A support for smartphones & tablets (max screen size 11").
4
A multi cable to connect the PIX4TEAM robot to a SONY camera
to enjoy automatic zoom and control from the PIX4TEAM Remote
app. If you use an older SONY camera version or a CANON camera,
you’ll need A/V-R or LANC cable to control the camera (cables are
sold separately on our website).
List of compatible cameras:
5
An AC adapter to connect the robot to the main socket adapted
to your country of delivery.
6
A 3-meters long Ethernet cable.
7
A batterie NP F970
1
2
3
5
6
4
7
1. Power supply
B. Turning the robot on and off
The Robot operates on main socket using an AC adapter
provided in the PIX4TEAM kit.
The robot can also operate with an autonomy of about 2H30 -
3h30 using the NP F970 battery provided with the PIX4TEAM.
The battery can be inserted
at the back of the robot after
removing the battery cover.
Slide your battery so that it
is well clipped and does not
move.
The battery can be removed
by pressing the “BattRelease”
button and sliding the
battery upwards.
3
To recharge the battery, insert it on the robot then connect
the robot to the main socket using the supplied AC adapter
(charging time for a 7800mAh battery: 3 hours 20 minutes).
The orange LED lights up during the charge and turns off when
charge is complete.
1
2
1
3
2
Part 1. Installation guide
4