Nissin MG80 Pro Flash for Cameras - Manual (Page 8)

7
Basic Operation
NOTE
Do not use the MG80 Pro as a holder to pick up the whole camera system.
Mounting MG80 Pro on the camera
Removing MG80 Pro from the camera
Turn off MG80 Pro.
Turn off MG80 Pro. 1.
Turn the lock ring of MG80 to loosen it all the
way as shown in the picture.
2.
Slide the mounting foot of MG80 into the
hotshoe of the camera.
3.
Turn the lock ring to opposite direction and
tighten it.
4.
Turn the lock ring of MG80 to loosen it
all the way as shown in the picture.
1.
2.
Slide the mounting foot of MG80 out of the
hotshoe of the camera.
3.