Nissin MG80 Pro Flash for Cameras - Manual (Page 17)

Group Setting
1. Power on Nissin Di700A and switch to wireless slave mode,
press several times until the Group mode in the display.
2. Turn the to change the group. Press key to confirm.
MG80 Pro, provides individual control of 8 groups (A, B, C, D & Ȧ,
Ḃ, Ċ, Ḋ) with different settings. Before shooting, you have to set
each strobes to be one of the groups.
Set
A B C
/ /
Set
Set
A B C
/ /
1. Use Mode Dial to change group .
1. Use Mode Dial to change group . A B C
/ /
Nissin Di700A Flash
Nissin i60A Flash
Nissin MG10 Flash
Nissin Air R Receiver
1. Use Mode Dial to change group .
Nissin MG80 Pro Slave Mode
1. Press Group Selection button to change
Hold 1 second to change between Basic Group and Advance Group.
Nissin MG80 Pro Commander Mode
The setting for the On-Camera flash on Advance Group
16