Nissin MG80 Pro Flash for Cameras - Manual (Page 6)

Inserting batteries
Energy saving
Battery status
1. Open the battery compartment door and insert 4 x 14500
Li-ion or size AA rechargeable batteries as shown in the
picture.
2. Make sure the + and - battery contacts are correctly
inserted in the battery compartment.
3. Close the battery compartment door and slide it back in
place.
Before starting wireless flash shooting.
5
2
1
2
1
Press any button Press Power button
Dim
30 sec
Sleep
2 mins
Turn Off
60 mins
A blinking signal shown on the Pilot Button mean:
- Wrong insertion of battery (battery type and/or position)
- Low battery
- Battery overheating
It is recommended to use 4 batteries in the same brand and type, and replace them all at
the same time.